Check engine / malfunction indicator lamp
The engine control system has detected a fault. Often emissions-related.
Action:Seek prompt inspection
Next step: Have the engine codes read and diagnosed. Continue driving gently if the light is steady.
Honda note: A flashing check engine light indicates a severe misfire — reduce power and seek service immediately.
Source: Honda owner’s manual (illustrative)
Oil pressure warning
Engine oil pressure is too low.
Action:Stop safely
Next step: Stop safely as soon as possible and turn off the engine. Check oil level.
Honda note: Do not continue driving with the oil pressure light on — risk of engine damage.
Source: Honda owner’s manual (illustrative)
Brake system warning
Parking brake applied, low brake fluid, or brake system fault.
Action:Stop safely
Next step: Release parking brake. If light stays on, check brake fluid and seek inspection.
Honda note: Red brake warning with a soft pedal means do not drive — tow to a shop.
Source: Honda owner’s manual (illustrative)
Battery / charging system warning
The charging system is not operating properly.
Action:Seek prompt inspection
Next step: Turn off non-essential electrical loads and drive to a repair facility promptly.
Honda note: The vehicle may stall once the battery is depleted.
Source: Honda owner’s manual (illustrative)
Tire pressure monitoring (TPMS)
One or more tires are significantly underinflated, or the TPMS needs service.
Action:Seek prompt inspection
Next step: Check and adjust tire pressures. If light flashes, the TPMS system needs service.
Honda note: Check pressures when tires are cold.
Source: Honda owner’s manual (illustrative)
Engine coolant temperature warning
Engine coolant is overheating.
Action:Stop safely
Next step: Stop safely, turn off the engine, and let it cool. Check coolant level when cool.
Honda note: Never open the radiator cap on a hot engine.
Source: Honda owner’s manual (illustrative)
ABS warning
Anti-lock brake system fault. Brakes still work, but ABS may not.
Action:Seek prompt inspection
Next step: Have the ABS system diagnosed. Avoid hard braking.
Honda note: Normal braking is typically still available.
Source: Honda owner’s manual (illustrative)
VSA / stability control warning
Vehicle Stability Assist system fault or system off.
Action:Consult manual
Next step: Drive cautiously. If light stays on, have the system inspected.
Honda note: VSA may be manually turned off — check the VSA OFF button.
Source: Honda owner’s manual (illustrative)
Seat belt reminder
Driver or passenger seat belt not fastened.
Action:Consult manual
Next step: Fasten all seat belts.
Honda note: Buckle up before driving.
Source: Honda owner’s manual (illustrative)
High beam indicator
High beam headlights are on.
Action:Consult manual
Next step: Switch to low beams when approaching traffic.
Honda note: Blue indicator is normal when high beams active.
Source: Honda owner’s manual (illustrative)
Turn signal / hazard indicator
Turn signals or hazard lights are active.
Action:Consult manual
Next step: Cancel the turn signal after turning.
Honda note: Fast flashing may indicate a burnt-out bulb.
Source: Honda owner’s manual (illustrative)